top of page
TechnoDigm™ SPV200 Spool Valve

TechnoDigm™ SPV200 Spool Valve

TechnoDigm™ SPV200 is a pneumatic valve that has been designed specifically to address dripping and tailing issues effectively. The internal design creates a suck-back effect as opposed to standard piston valves. The suck-back feature greatly increases accuracy and repeatability when dispensing materials. This feature prevents droplets from remaining on the dispensing tip when using lower viscosity fluids. This feature also enables the user to control the amount of suck-back via an adjustment knob on top of the valve. It is an effective valve for dispensing medium to high viscosity epoxies and adhesives such as RTV, grease, gasketing epoxies, and high viscosity sealant. The stainless steel body allows the valve to be used for any kind of material even those corrosive types.

  • Operating Air 5.0 bar
    Maximum Fluid Pressure 7.0 bar
    Material Inlet Metal Female Luer or Compression fitting
    Material Outlet Male Luer Adaptor to 1/4″-28 UNF
    Suck-back Stroke 1 mm (Max. 2 turns)
    Flow Rate 5.0 l/min
    Actuator Body Stainless Steel
    Wetted Chamber Stainless Steel
    Cycle Rate Exceeds 400 cycles/min
    Range of Temperature 5 ~ 50 °C
    Weight Approximate 280g