top of page
TechnoDigm™ PP2000 Peristaltic Pump Dispenser

TechnoDigm™ PP2000 Peristaltic Pump Dispenser

The Benchtop PP2000 Peristaltic Dispenser transfers low viscosity liquids by pressure displacement applied by a turning rotor against a tube carrying the material. Usually, these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air-free. Dispense outputs can be timed from 0.01 - 99.99 revolutions with flow speeds from 0.01 - 9 ml / min using PTFE tubing. The pump is bi-directional allowing suck-back after dispense to prevent dripping of the fluid. When dispensing UV adhesives use only black tubing. This avoids curing of the adhesive in the tube.

  • Power Consumption 1A
    Rotor Speed 0.01 – 9 ml per min (depends on tube size)
    Dispensing Time Range 0.01 – 99.99 revolutions
    Operating Temperature +5°C – +50°C (+41°F -122°F)
    Power Supply 12V/DC Adapter 100-240V/AC 50/60 Hz
    Dimension 100 x 220 x 178 mm
    Weight 2 Kg


    • Air-free dispensing
    • Direct Dispensing from bottle / container
    • Manual or timed dispensing intervals
    • Reversible pump flow for “vacuum suck back” & maintenance
    • Consistent dispensed volume