top of page
TechnoDigm™ Jetting Valve and Controller

TechnoDigm™ Jetting Valve and Controller

JV200 is Technodigm™ superlative non-contact jetting valve engineered to jet low to high viscosity fluids such as greases, fluxes, epoxies, and adhesives specifically for applications that require dispensing in difficult to reach areas or even uneven surfaces. Depending on types of fluid, typical dot sizes achievable can be from 0.3mm upwards.


JV200 when operated through its dedicated controller JVC2000, makes it possible to achieve better stroke control, improved close time, and faster full stroke open time resulting in seamless dispensing with speeds of more than 200Hz. The JVC2000 features a touch screen that has an easy and user-friendly interface for setup and operation.


The JV200 is also modular in design allowing the wetted parts and heater element to be separated from the actuator for quick and easy maintenance. In a nutshell, JV200 is able to perform dispensing with less turbulence for more prominent liquid yield consistency, reduced cycle time, and better process control.

  • Control Method Electro Pneumatic
    Valve Air Pressure Typical: 4 to 5 bar, Max.: 10 bar
    Syringe Air Pressure 0.1 bar to 10 bar
    Min. Dispensing Time 1.7ms (valve open time)
    Max. Dispensing Rate 270Hz (drops per second)
    Viscosity Range Low (1 cps) to High (200k cps)
    Material Inlet Female Luer Lock Connector
    Heater Operating Temperature Range 25 ~ 80 ºC
    Controller Technodigm JVC2000
    Weight Valve: 692g
    Controller: 7.8 kg
    Power Consumption 100-240 VAC 50/60Hz 100W
    Display Touchscreen, Human Machine Interface
    Standard Interfaces RS232C, 24V / 5V PLC
    Dimensions (L) x (H) x (W) Valve: 85 x 105 x 75mm
    Controller: 295 x 147 x 258mm