TechnoDigm™ AV300 Auger Valve and Controller
The AV300 auger valve is specifically designed for precision, accuracy, and repeatability. The AV300 is seamlessly integrated with TechnoDigm™ signature dispensing robots, resulting in a holistic dispensing system capable of fulfilling the requirements of applications such as gasketing, dam and fill, as well as component encapsulation.
The AV300 was designed as an economic alternative to the AV200. Driven by a high-quality DC brush motor, the AV300 provides a holistic solution capable of addressing most dispensing requirements. Like all TechnoDigm™ products, the AV300 is designed with maintainability in mind. The wetted component of the AV300 can be dismantled easily and quickly without any tools.
Coupled with the AVC3000 controller, users have fine control over dispensing parameters such as the auger speed, dispensing time, and material pressure.
Operating type DC Servomotor On / Off Motor output power 8 W, DC24V Driving torque Max 0.189 Nm Material inlet pressure 0.1 bar to 2 bar Motor rotational speed 30 to 300 rpm Dispense time interval 0.1 to 9999 second Viscosity range Medium (30k cps) to High (500k cps) Material inlet Female Luer Lock Connector (standard) Operating temperature 20 ~ 40°C Controller Technodigm AVC3000 Weight 520g Type of feed screw 8 pitch and 16 pitch Maximum dispense rate Maximum dispense rate for high viscous material (500k cps) is 6mg/sec using 8 pitch leadscrew
